Tactical Carbine Training....A few things I have learned and observed
I thought this info from another thread could be useful to a
person who has never taken a tactical carbine course. A few things I have
learned and observed:
I have taken NUMEROUS tactical carbine and tactical pistol courses from many
different trainers over the last 5 years. I have also taken a few Patrol Rifle
and SWAT carbine courses. What follows are some things that I have learned in
those course.
-Use quality USA made ammo, such as Federal, Winchester, etc. Do not take
surplus, Wolf, etc. to a class. One of the worst mistakes I see are shooters
spending good money on training and then showing up with cheap ammo, and they
have nothing but ammo related malfunctions the entire class. An example of this
is we had 4 guys that were shooting "Olympic" brand ammo, and their guns were
jamming every couple of rounds the entire class, this slowed things down for the
rest of us.
-MASTER YOUR IRON SIGHTS FIRST. A lot of guys love optics, and in my personal
opinion optics help most shooters. But before you go an buy an ACOG, Aimpoint,
EO Tech, or any other optic, master your iron sights FIRST. Once you have
mastered the iron sights then and only then consider moving up to optics.
-Use quality USGI magazines with the GREEN or new Magpul followers. Another
thing that I do to my magazines is use the Wolff Gunsprings 10%+ magazine
springs in my magazines. If you have the time take the magazines to the range
and make sure they work good. Nothing worse then showing up to class with crappy
magazines and having your gun malfunction on a constant basis due to bad
magazines.
-Learn to properly clean and maintain your gun properly. I always recommend the
US Army or USMC M16A2 manual to new shooters, these manuals will show you how to
properly maintain and clean your AR15. On the first day of class make sure you
show up with a properly cleaned and lubed carbine. Everyday after class properly
field strip, clean, and lube your carbine. In most Tactical Carbine Courses you
will shoot approximately 500 per day, everyday. The guys that don't properly
clean and lube their carbines will be easy to spot......Their guns usually go
"TITS UP" the second day of class prior to lunch. A USGI cleaning kit has
everything that you need in it to properly clean, maintain, and lube your
gun.....and make sure to use the chamber brush.
-Buy a quality rifle / carbine and don't try to build one. In the classes that I
have been to approximately 90%+ of the "built" guns have gone tit's up. Last
year in a carbine course, the instructor took a poll. Of over 20 students, 12 or
so had "built" rifles (all AR-15's) and of those 12 100% of them went tits up
during the class. The rest of the guys had factory built guns and none of the
factory built guns went tits up. That is not to say that I haven't seen a
factory gun go tit's up, it just happens a lot less than with a gun that is
built from parts from different manufacturers. Stick with the "Tier 1
manufacturers" ie. Colt, Bushmaster, and Rock River Arms as a general
rule.....and make sure the gun has a chrome lined barrel.
-Match triggers are the 2nd most problematic piece of gear that I see at carbine
courses. Stick with a standard USGI style trigger, stay away from the 2 stage,
match, tactical, etc, etc, etc, triggers.
-I always recommend having a gun that has 1,000 rounds through it prior to
coming to class. If there are any problems (ie. loose gas key, etc) they will
usually arise in the first 1,000 rounds. I have seen some guys show up to class
with a brand new gun and put 1,000 rounds down range without a problem, and I
have seen other brand new guns that have some teething problems the first day
because they are brand new, but start settling down the second day. Along with
this "break in" period, it also let's the shooter know what ammo and magazines
the gun does or doesn't like. If you shoot the first 1,000 rounds with Federal
American Eagle .223 and 5 USGI magazines with no problems, then take that same
ammo and those same 5 magazines to the class.
-If you have access to a second AR, take it to the class. If carbine #1 goes
tit's up, you've got a back up.
-If you are new to AR's get a SIMPLE carbine and shoot it in the class.....Many
times I have seen shooters show up to a class with all kinds of crap hanging off
of their guns and all those accessories give them nothing but problems. Start
off with a simple carbine with iron sights, take the Tactical Carbine Course,
learn how to operate your gun proficiently, then add accessories as you need
them.
-Make sure you have a good sling, I always recommend a 3 point sling to new
shooters, and you will probably need a 3 point sling, because most likely you
will be doing transition drills (transitioning from your carbine to your pistol)
-Remember keep it simple, take a good quality, factory made AR (and use the IRON
SIGHTS), good quality USA made ammo, good quality USGI magazines, a 3 point
sling, a USGI cleaning kit, knee pads, plenty of water, and an open mind!!!
________________________________________________
Holsters and magazine holders:
For a holster I would recommend a Blade-Tech, G-Code, or any other high quality
KYDEX outside the waist band holster that attaches to the belt via BELT LOOPS. I
am a big fan of train with what you will carry. If you are not going to carry
your gun around on a daily basis in a tactical thigh holster, then don't wear it
to training. Wear what you will use in real life!!!
This also goes for carrying your spare magazines for your carbine. If you are
going to carry an extra spare magazine or two in your rear support side pants
pocket, or in the cargo pocket of your Old Navy cargo pants....then when you
attend training, store your spare magazines in the same place. Don't be one of
those guys that has a $500 chest rig, and will never use it in real life. Use in
training what you will use in real life.
There is a reason why I recommend this. A Narcotics Sgt. that works on my Dept.
went to a 3 gun match and he was watching another shooter. The shooter's AR15
had been working fine all day, then came up to a stage that required a magazine
change. The shooter shot the course of fire and retrieved a magazine from his
support side rear pocket, inserted it into the AR15, shot and the gun jammed.
The shooter cleared the jam, fired another round and the gun jammed again. This
happened for several rounds and the shooter had to stop and fix his gun. After
examining the gun the shooter had realized that he had a gum wrapper in his
pocket and this some how got attached to the feed lip of the magazine, when the
shooter inserted the magazine and the first round chambered, it carried the gum
wrapper into the action of the AR15, thus causing his AR15 to malfunction.
The Sgt. told me that many times he and his crew run out of the office to go
serve a small warrant and instead of wearing all his tactical gear he just wears
his vest and puts an extra magazine or two in his back pocket. After seeing what
happened at this match, the Sgt now makes sure that his pocket is free of any
debris PRIOR to putting a magazine in his pants pocket. This is a great thing to
learn in training, but would SUCK in a very bad way to have to learn when the
bullets were flying both ways. In short train like you will fight.
________________________________________________
The original thread:
http://lightfighter.net/eve/ubb.x/a/tpc/f/7206084761/m/8601034811
Semper Fi,
Jeff